Technical Information:
ALTEK's 12/24 f.o. MPO/MTP® Trunk cable facilitates a rapid deployment in high density environments. Used to interconnect MPO/MTP® cassettes and panels with the active equipment ports.
Benefits:
► Use to distribute some or all of the fibers in a trunk cable to other areas;
► Have pins (Male type) on one end of the connector, and no pin (Female type) on the other end;
► Choices of MPO/MTP® in 12 or 24-fiber connector interface;
► 100% tested;
► Fiber counts available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers;
► Round & mini-core cable structure to eliminate bend sensitivity;
► Available in single-mode (9/125μm),multi-mode (50 or 62.5/125μm)and 10Gig fiber;
► Optional pulling eye design to fit for different installation environment.
General Connector Specification:
Other connectors'Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973;
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973;
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973;
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.
Specifications and Dimensions:
Parameter | Single-mode |
Multi-mode |
|||
Basic |
Fiber connector |
FC, SC, LC, ST, MU, MTRJ, MPO |
|||
Ferrule End-face |
PC |
UPC |
APC |
UPC |
|
Insertion Loss |
≤0.2dB |
≤0.2dB |
≤0.3dB |
≤0.3bB |
|
Return Loss |
≥50dB |
≥55dB |
≥60dB |
≥35dB |
|
Ceramic Ferrule Specification |
125.5um concentricity deviations: |
127um concentricity deviations:<=3um |
|||
Suitable Fiber |
9/125um |
50/125um,62.5/125um |
|||
End-face Geometry |
Radius of Curvature |
7~25mm |
5~12mm |
N/A |
|
Fiber Protrusion |
≤50nm |
≤100nm |
N/A |
||
Fiber Under Cut |
≤100nm |
≤100nm |
N/A |
||
Apex offset |
≤50um |
||||
Mechanical |
Exchangeability |
≤0.2dB |
|||
Salt Spray |
≤0.1dB |
||||
Drop |
≤0.2dB(1.5M, 5 drops) |
||||
Vibration |
IL ≤0.2dB(550Hz, 1.5mm) |
||||
Repeatability |
≤ 0.1dB(1000 times) |
||||
Durability |
> 1000 times |
||||
Operating Temperature |
-40℃ ~ +85℃ |
The Basic Division of MTP® Connectors:
Type and Color Code Connectors |
Insertion |
Optical |
Operating |
Single-mode MTP® Elite® Connector |
0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Single-mode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Multimode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3 |
> 20 dB (0°Flat Polished)2,3 |
-40℃ to 75℃ |
1 IL test according to IEC 61300-3-4; |
Recommended buffer fiber and color-coded connectors:
Cable Type |
Single-mode MTP® Elite® |
Single-mode MTP® Standard |
Multimode MTP® Elite® |
Multimode MTP® Standard |
Bare Ribbon |
Mustard Color |
Green Color |
Aqua Color |
Beige Color |
Flat ribbon Cordage | ||||
Cable Ø 2.0mm | ||||
Cable Ø 3.0mm | ||||
Cable Ø 3.6mm | ||||
Cable Ø 4.5mm | ||||
Cable Ø 5.0mm | ||||
Cable Ø 5.5mm |
Individually Plastic Bag With Testing Result:
High Density MTP®/MPO Cabling System In Dada Center:
Ordering Information:
► 1 ea for individual static-free bag with test report;
► Connector Customized Inquired;
► Cable Customized Length;
Product Description | Lengths |
Wire map |
12 Fiber MPO/MTP female –female, OS2 |
0-80 Meter |
Straight A Wire |
12 Fiber MPO/MTP male-female, OS2 |
0-80 Meter |
Straight A Wire |
12 Fiber MPO/MTP male-male, OS2 |
0-80 Meter |
Straight A Wire |
12 Fiber MPO/MTP female –female, OS2 |
0-80 Meter |
Straight B Wire |
12 Fiber MPO/MTP male-female, OS2 |
0-80 Meter |
Straight B Wire |
12 Fiber MPO/MTP female –female, OS2 |
0-80 Meter |
Pair flipped C Wire |
12 Fiber MPO/MTP male-male, OS2 |
0-80 Meter |
Pair flipped C Wire |